Speeco S24045000 - Manual (Page 5)

Page 3
PART NUMBER: S52020500
LOCATION: TOP END OF AUGER TUBE
NOTE: IF THE OUTPUT SHAFT GUARD MENTIONED IN THE ABOVE DECAL IS MISSING ,YOU
MAY ORDER A REPLACEMENT BY CALLING US AT 1-800-525-8322.
GENERAL SAFETY AND PREPARATION
ALWAYS make sure that anyone else who operates this post hole digger has read and understood the contents of the
owner’s manual and all safety decals on the product.
ALWAYS be certain that all members of the work party are familiar with the operation of the digger and the hazards
associated with it.
ALWAYS check with authorities for underground utilities before digging a hole. Serious injury or death could result from
contact with gas or electric lines.
ALWAYS check the tractor owner’s manual for instructions on operation, attachment of 3-point equipment and safety.
ALWAYS make sure that all safety shields are in place and tightened down. Do not operate this post hole digger if any
shields are missing. Contact SpeeCo, Inc. at 1-800-525-8322 for replacement part(s).
ALWAYS make sure that the auger point and cutting edges are intact and in good working order before using this digger.
OPERATING SAFETY
ALWAYS operate this post hole digger from the tractor seat. Only one person should operate the digger.
NEVER attach the post hole digger with the tractor engine running.
NEVER operate the post hole digger with anyone near or in contact with any part of the implement, PTO driveline or
auger.
Serious injury or death could result from entanglement with moving parts.