Sound Oasis VTS-1000 - Manual (Page 9)

14 15
demo track
For a personal introduction to vibroacoustic therapy by
Dr. Lee Bartel, press and hold down the Timer Selection Button
for about 3 seconds while the unit is turned on. When the
Demo track is playing, the following will show on the display.
Set-Up
a. Unpack the product and make sure that any and all tape
and protective wrap is removed from the various parts.
b. Attach the Remote Control to the Remote Control Jack
located on the side of the Vibroacoustic Back Support.
c. Connect the supplied AC Adapter to the AC Adapter Jack
located on the side of the Vibroacoustic Back Support. Plug
the AC Adapter into an electrical wall outlet.
note: Your AC Adapter is dual voltage and may be used
worldwide with the proper slip-on adapter plug.
d. Place the Vibroacoustic Back Support on a chair, sofa or on
top of a bed.
note: If used on a bed, place pillows under the upper
portion of the Vibroacoustic Back Support to position it
more comfortably.
Remote Control Jack
AC Adapter Jack