Solvline SG-3011DCL232 V1.0 - Manual (Page 15)

SerialGate User Guide

Serial Port: RS232 (DB-9 MALE)

Power Connector: 12 V DC Adapter (Inner: +, Outer: -)
 Reset Button: When pressed and released, SG-3011DCL/232 will reboot.

LED: Operation status of SG-3011DCL/232. Next section describes the meaning of each
LED display status.

LAN port: 8-pin RJ45 jack connects SG-3011DCL/232 to networking devices such as
Ethernet card, hub, and router.
SG-3011DCL/232 LED
LED Name Status Operation
1 RDY Blink
When powered on, it will stay on for few seconds and starts
to blink when booting is complete.
2 SRL Blink
Red blinks when data transmitted
Yellow Green blinks when data received
3
LAN Port
(Left Green)
On 100baseT connection detected & LAN data transferred
Off 10baseT connection detected & LAN data transferred
4
LAN Port
(Right Orange)
On Network connected
Off Network disconnected
Blink LAN data being transmitted
15