Solvline MultiModem - Manual (Page 14)

14
Installation & Test Procedure
Installation & Test Procedure
Installation
1. Turn off the computer.
2. Open the computer body to mount the modem on an empty slot.
3. Turn on the computer.
4. Install the drive by referring to the manual.
Test
1. Run the hyper terminal of the auxiliary program.
2. Select the port to be tested, and enter the telephone number.
3. Press the Cancel button, and enter the “AT” command.
4. If the "OK" message appears, the installation is normally done.
Change the country code
The products are set default code(B5 – USA )
When used in other countries, need to change the country code.
1. Run the hyper terminal of the auxiliary program.
2. Select the port to be tested, and enter the telephone number.
3. Press the Cancel button, and enter the “AT” command.
4. Enter the “AT+GCI=
5. If you want to see present country code, type “AT+GCI?”
Country Country Code
USA B5
UK B4
Germany 42
Hong kong 50
Japan 00
Korea 61