Solberg STS Series - Manual (Page 3)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Rev: MMSTS-1147
Page 3
SOLBERG
Section A
INTRODUCTION
The purpose of this manual is instruction for the proper assembly and care of
Solberg STS Series.
*WARNING*
This manual must be read and thoroughly
understood before using and caring for this
STS unit. Failure to comply could result in
product/system contamination or personal
injury.
This manual should be used as a supplement to the user’s understanding of the
proper care needed to maintain a safe and dependable STS unit. It is the
responsibility of the user to interpret and explain all instructions to persons who
do not read or understand English BEFORE they are allowed to maintain and
use this STS unit.
This manual should be readily available to all operators responsible for operation
and maintenance of the STS unit.
We thank you for selecting products from Solberg Manufacturing, Inc. We are
confident that our superior filter designs will meet your application requirements.
Section B
GENERAL INFORMATION
All Solberg STS units
have a “T” style inline connection. Within the clear bucket
is a tube assembly containing a ball float for flow shut-off. A clear bucket is used
with a ¾” FPT drain connection for liquid removal.