Solberg SMConfigurationD(Pg.3-10,11) - Manual (Page 13)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Page 13
7. Securing canister top to canister base.
A. Make sure all surfaces are free from dust and other particulate.
B. Replace cover. Feed threaded bolt into corresponding bolt holes and
secure with washer and hex nut. Note: Do NOT over tighten!
Figure C.7.1: Housing top and hex nuts in secured position.
Figure C.6.1: Element properly secured in housing base.