Seville Classics SHE24605Z - Manual (Page 2)

Note: The poles have double grooves every
5 inches for easy assembly.
Step 3:
Starting from the bottom, fasten a pair of
Slip Sleeves (D) around the groove of each
pole.
Step 4:
Slide a Shelf (E) over the top of the 4 poles
until it rests snugly over the sleeves.
Step 5:
Repeat Step 4 by fastening more Slip
Sleeves (D) on the poles and sliding the
Shelves (E) through the poles to fit tightly
on the sleeves for the remaining shelves.
TIP: If necessary, use a rubber mallet to
further secure the shelf.
Please make sure you have all the parts before assembly
A 4 pcs B 4 pcs C 4 pcs D 20 pairs
Top Poles Bottom Poles Screw Connectors Slip Sleeves
Plastic cap (top)
Threaded end (bottom) (May be attached to pole)
E 5 pcs F 2 pairs G 4 pcs
Shelves Wheels Leveling Feet
Step 1:
Screw the Top Poles (A) and Bottom
Poles (B) together using the Screw
Connectors (C).
Step 2:
Screw the Wheels (F) or Leveling Feet
(G) into the Bottom Poles (B).
CAUTION:
• DO NOT STAND ON OR CLIMB ON THE SHELVING SYSTEM.
• DO NOT DROP HEAVY ITEMS ON THE SYSTEM.
• PLACE HEAVIER ITEMS ON THE LOWER SHELVES AND
LIGHTER ONES ON THE TOP SHELVES.
• DO NOT MOVE THE SYSTEM WHILE LOADED.
WARNING:
• HOLDS 500 LB (226.8 KG) TOTAL USING WHEELS.
• HOLDS 3,000 LB (1,360.8 KG) TOTAL USING LEVELING FEET.