Seville Classics UHD20205 - Manual (Page 12)

(pg 11 of 19)
Step 11.
Step 12.
Step 13.
UltraHD Rolling Cabinet (Model No. 20205)
Fit and attach Small Drawer Side Panels (#12-2 and #12-3)
one at a time into the back of the Small Drawer Front Panel
(#12-1). Make sure the Drawer Side Panels are placed in
all the way making contact with the rear of the Small
Drawer Front Panel (#12-1). Line up the screw holes and
use Screw B (#21) to tighten them.
From above, fit and attach Small Drawer Base Panel (#12-
5) between the two sides and into the back of the Small
Drawer Front Panel (#12-1). Use Screw B (#21) to tighten.
Note: Do not fully tighten any one screw until all screws are
partially screwed in.
Attach the Small Drawer Back Panel (#12-4) to the rest of
the assembled drawer. Use Screw B (#21) to tighten. Once
you have the first Small Drawer assembled, repeat Steps
11-13 to assemble the other two Small Drawers. Once
completed, you should have three Small Drawers.
Install Small Drawer Base Panel (#12-5).
Install Small Drawer Back Panel (#12-4).
Install Small Drawer Side Panels (#12-2 and #12-3).