Seville Classics UHD16238B - Manual (Page 8)

WARNING:
Step 1: Install (#1-A) Left Side Panel.
Note:
Step 2: Install (#2-A) Right Side Panel.
Step 3: Install (#6-A) Left Door.
Note:
ASSEMBLY INSTRUCTIONS
(pg 7 of 11)
Storage Cabinet (Model No. 16238)
1). Place (#6-A1) Left Door - Upper Panel and (#6-A2)
Left Door - Bottom Panel together, line up screw holes,
use 1pc (#41) Screw F to tighten from the side.
2). Place the (#6-A3) Door Panel Connection Part over
the touching sides, line up the screw holes, use 4pcs
(#41) Screw F to tighten from the top, and use 4pcs
(#52) Screw K to tighten from outside edge.
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
Place the (#1-A1) Left Side - Upper Panel and (#1-A2)
Left Side - Bottom Panel together, place the (#1-A3)
Side Panel Reinforcement Connection Part over the
touching edges, line up screw holes, use 4pcs of (#42)
Screw G to tighten from the side, then use 6pcs of
(#41) Screw F to tighten from the top side.
Make sure the (#1-A1) Left Side Upper Panel is flushed
with (#1-A2) Left Side Bottom Panel.
Repeat Step 1, use (#2-A1) Right Side Upper Panel,
(#2-A2) Right Side Bottom Panel, (#1-A3) Side Panel
Reinforcement Connection Part, 4pcs (#42) Screw G
and 6pcs (#41) Screw F to install (#2-A) Right Side
Panel.
Make sure the (#6-A1) Left Door - Upper Panel is
flushed with (#6-A2) Left Door - Bottom Panel.