Seville Classics UHD20226B - Manual (Page 4)

8
#11
#9
#12
Detailed Back View of Pegboard
Step 1:
Peel and Stick the Spacers (#12) (top protective
layer must be peeled off to expose the adhesive)
onto the BACK of the pegboards where the Screws
(#11) will attach to the wall. See image below.
Step 2:
Place the pegboard at desired location on the wall
and mark the locations to drill holes. Each pegboard
needs 4 pcs. of Screws (#11) and Plastic Anchors
(#10). Install ONE pegboard at a time to assure
level. Repeat steps for the NEXT pegboard to place
next to the first one or at desired location.
(pg. 4 of 5)
Optional Expanded Pegboard