Seville Classics SHE05122B - Manual (Page 2)

Please make sure you have all the parts before assembly
A 4 pcs B 4 pcs C 16 pairs D 2 pcs
Poles Leveling Feet Slip Sleeves Cross Bars
E 2 pairs F 1 pc G 1 pc H 1 pc
Sidebars Shelf Shallow Wire Basket Deep Wire Basket
I 3 pcs J 4 pcs
Inlays Stacking Connectors
Step 1:
Screw the Leveling Feet (B) into the
bottom of each Pole (A).
Step 2:
Starting at the bottom, fasten a pair of Slip Sleeves (C) around the
groove of each pole. If necessary, move the sleeves slightly up or down
until it snaps into position.
Step 3:
Slide Cross Bars (D) over the front and back poles and push
down firmly.
Step 4:
Place slip sleeves around the grooves of the poles and slide the
Sidebars (E) on each side of the poles. Repeat for the second
pair of sidebars.
NOTE: The drawer glides on sidebars face inward to support wire
baskets.
Step 5:
Fasten slip sleeves at the top grooves of the
poles and slide Shelf (F) over the poles.