Seville Classics SHE16181ZB - Manual (Page 2)

Please make sure you have all the parts before assembly
A 6 pcs B 6 pcs C 6 pcs D 30 pairs
Top Poles Bottom Poles Screw Connectors Slip Sleeves
Plastic cap (top)
Threaded end (bottom) (May be attached to pole)
E 3 pcs F 4 pcs G 1 pc H 4 pcs
18”x29” Shelves 18”x18” Shelves 18”x9” Shelf Hooks
I 2 pcs J 3 pairs K 6 pcs L 1 pc
Hanging Rods Casters Leveling Feet Fabric Cover
Step 1:
Screw Top Poles (A) and Bottom Poles
(B) together using Screw Connectors (C).
Step 2:
Screw Casters (J) or Leveling Feet (K)
into bottom poles.
Step 3:
Starting from the bottom, fasten 4 pairs of Slip Sleeves (D) around the
grooves of 4 poles.
Note: The poles have double grooves every 5 inches for easy assembly.
Step 4:
Slide an 18”x29” Shelf (E) over the top of 4 poles until it rests snugly
over the sleeves.
Tip: If necessary, use a rubber mallet to further secure the shelf.
Step 5:
Fasten 4 pairs of slip sleeves around the 2 shared poles and the 2
remaining poles. Slide an 18”x18” Shelf (F) over the top of 4 poles until
it rests snugly over the sleeves. Repeat for another 18”x18” shelf.
Step 6:
Fasten 4 pairs of slip sleeves at a desired height of 4 poles. Slide an
18”x29” shelf over the top of 4 poles until it rests snugly over the sleeves.
Repeat for another 18”x18” shelf.