Seville Classics STR05811B - Manual (Page 2)

Please make sure you have all the parts before assembly
A 4 pcs B 4 pcs C 20 pairs D 4 pcs
Top Pole Bottom Pole Slip Sleeve Leveling Foot
plastic cap (top)
threaded end (bottom)
E 5 pcs F 2 pcs G 2 pcs H 2 pcs
Shelf U-Sleeve Hanging Rod Screw
I 2 pcs J 6 sets Assembly Tool Required
Wall Bracket Anchor & Screw Phillips Screwdriver
Step 1:
Screw Leveling Feet (D) into Bottom
Poles (B).
Step 2:
Starting from the bottom, fasten 4 pairs of
Slip Sleeves (C) around the grooves of the
4 bottom poles. If necessary, move the
sleeves slightly up or down until they snap
into position.
Step 3:
Slide a Shelf (E) over the top of the 4
bottom poles until it rests snugly over the
slip sleeves. Repeat steps 2 and 3 by
attaching 4 more pairs of slip sleeves and
another shelf at the desired height.
Note: The poles have double grooves every
5 inches for easy assembly.
Step 4:
Screw Top Poles (A) to bottom poles.
Step 5:
Repeat steps 2 and 3 by attaching 12 more
pairs of slip sleeves and 3 more shelves at
the desired heights.