Operation and maintenance, Cleaning the speaker – Sceptre SP05032 User Manual
Page 12

To connect to a portable music player
Obtain a 3.mm stereo cable and plug one end into
your portable music player.
Plug the other end of the cable into your SoundPal
speaker.
Press
to turn on the speaker.
Turn on your music player to play music.
If the LED is flashing blue, the speaker is under pairing
mode. Press
to switch to Line-in mode.
To play music files with a Micro-SD card
Obtain a Micro-SD card with your music files.
Insert the Micro-SD card into the SoundPal’s Micro-SD
slot.
Press
to turn on the speaker.
Press
to play the files.
.
.
3.
4.
.
.
.
3.
4.
Micro-SD cards need to be 3 gigabytes or smaller and
formatted in FAT or FAT3 file system in order for the
SoundPal to read / play music files.
To connect two SoundPal speakers to a TV
Obtain the dual 3.mm to RCA stereo cable.
Connect the RCA stereo end of the cable to your TV
matching the red and white RCA female recepticles on
your TV.
Connect each 3.mm stereo jack to an individual
SoundPal. Turn on both SoundPal speakers and the TV
to experience dual SoundPal speakers.
Cleaning the Speaker
Important
Make sure the speaker is not charging by removing the
Micro-USB cable.
Do not use volatile solvent such as ethanol, rosin,
roluene solvent to clean the speaker.
Cleaning
Use a 00% cotton cloth or micro-fiber cloth to wipe the
speaker.
.
.
.
3.
•
•
•
Operation and Maintenance
Micro SD
Line In
DC 5V
Micro SD