Sceptre SP05032 - Manual (Page 11)

0
Pairing with Bluetooth® Devices
Pairing occurs when two Bluetooth® devices communicate
with each other and establish a connection. A record of
information about this connection is then stored in the
memory of each device. Once you pair a device with the
SoundPal™ speaker you should not have to pair it again.
To begin pairing with a Bluetooth® device
Press to turn on the speaker. You will see the LED
flash blue.
Set your Bluetooth device (cell phone or tablet or com-
puter) to scan or discover “SOUNDPAL” speaker, then
locate the Bluetooth list.
From the list, select the device named SOUNDPAL.
Your Bluetooth device will indicate when the pairing is
complete.
If you have previously paired with another device,
first press and hold in order to remove the cur-
rently device in memory, then repeat steps -4.
To connect to an already paired device
Press to turn on the speaker. You will see the LED
flash blue.
The speaker will auto connect.
.
.
3.
4.
5.
.
.
Auto-connect with NFC - Bluetooth®
NFC (near field communication) is an alternative way of
connecting Bluetooth® devices. This function requires
the device to have a NFC chip built in.
Press
to turn on the speaker. You will see the LED
flash blue. If the LED flashes slowly, press the
button to change the SoundPal into discovery mode.
Turn on your device’s NFC function.
Place your NFC device adjacent to the
button.
Follow the instructions on your Bluetooth® device.
Connecting to Other Devices
You can use another audio device such as a portable music
player with your SoundPal™ speaker. This requires using a
stereo audio cable with a 3.mm plug on both ends.
.
.
3.
4.
.
Operation
Micro SD Line In DC 5V