Sceptre X240-1920T - Manual (Page 24)

Page24 SCEPTRE X240
MISCELLANEOUS
This function adjusts many loose options inside the monitor.
1. Press MENU to open the OSD then highlight MISCELLANEOUS by pressing with the CH▲
or CH▼ buttons.
2. Press MENU to enter the function.
3. Press with the CH▲ or CH▼ buttons to select the option you want to adjust and press
MENU to adjust the function.
4. Press the VOL+ or VOL– buttons to adjust the value of the option.
i. SHARPNESS – This option adjusts the sharpness of the graphics and text.
ii. INPUT SELECT – This option lets you select the input you want.
iii. OVER DRIVE – This option helps increase pixel response time reducing
ghosting effects.
iv. DCR – This option turns dynamic contrast on or off.
v. DISPLAY INFORMATION – This option shows the monitor’s information
such as resolution and refresh rate.
Please Note :
•
You can switch sources easily by using the SOUCE button on the side of the
monitor.
EXIT
This function exits the OSD menu.
1. Select the EXIT function with the CH▲ or CH▼ buttons and press MENU to exit.
Please Note:
•
As an alternative you can press the S/A button to exit the OSD directly.