Sceptre E245BD-FHDR - Manual (Page 8)

- 8 -
www.SCEPTRE.com
SCEPTRE E245 Series LED HDTV User Manual
Attaching or Removing the Stand
1. To remove the stand completely, look at the back of the TV near the neck and
unscrew the 2 screws shown in the picture and the neck along with the base
should come off.
2. To attach the base plate, lay the display unit flat on a table. Afterwards attach the
base to the neck, and then insert the rubber o-ring to the bottom of the base as
indicated in the picture below. Finally, place the metal plate to over the rubber o-
ring.