Sceptre E245BD-FHDR - Manual (Page 25)

- 25 -
www.SCEPTRE.com
SCEPTRE E245 Series LED HDTV User Manual
OSD (On Screen Display) Controls
Via Remote Control
In order to adjust most of the options inside the On Screen Display (OSD), the picture
below shows all the buttons used on the remote control.
– This button opens the
OSD and also exits the OSD
by going to the previous
level of the OSD.
– This button exits the OSD
entirely.
▲ – This button changes the channel
to a higher number and also
functions as up direction in the OSD.
▼ – This button changes the channel
to a lower number and also functions
as down direction in the OSD.
◄ – This button decreases the
volume and also functions as left
direction in the OSD.
► – This button increases the
volume and also functions as right
direction in the OSD.
ENTER – This button changes the
channel in conjunction with the
number pad and also functions as
ENTER for selecting options in the
OSD.
Via TV Side Panel Buttons
In order to provide more than one type of OSD control buttons, the side panel’s buttons
have also been made functional for adjusting the OSD.
1. SOURCE – This button acts as the enter button to enter each
function or option.
2. MENU – This button opens the OSD and also exits out of menus.
3. CH(▲/▼) – These buttons functions as up/down direction in the
OSD.
4. VOL(+/-) – These buttons functions as left/right direction in the
OSD or increases/decreases the value of an option.