Sceptre X505BV-FMDR - Manual (Page 13)

- 13 -
www.SCEPTRE.com
SCEPTRE X505 HDTV User Manual
purchase a MHL cable from any electronic store and connect it to
HDMI3 and also your cell phone. Make sure the TV’s source is
changed to HDMI 3 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 3 also supports ROKU
™
streaming stick. Plug the ROKU stick to HDMI 3, and switch your
source to HDMI3. Afterwards use the purple colored buttons to
access ROKU functions.
7. Audio In - This connection port is for people who want to provide
audio to the TV when using a PC or a DVI video device. The sources
use 3.5mm mini-jack audio cable.
8. VGA - This connection port connects to a PC for video using VGA
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
9. TV – This connection is for digital or analog cable without the cable
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org .
10. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The orange (COAX
SPDIF OUT) connector sends out either bit-stream or PCM digital
sound signal to a home theater receiver with digital coax input.
Please Note:

This TV features a power saving function which will turn off the
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.