Sceptre X505BV-FMDR - Manual (Page 12)

- 12 -
www.SCEPTRE.com
SCEPTRE X505 HDTV User Manual
Rear View Connections
1. HEADPHONE – This connection is for headphones to be attached to
the TV.
2. YPbPr – This connection port is for DVD players or satellite / cable
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. This port shares the
audio jacks with Video.
3. Video – Video connects to devices that use composite video cables
such as VCR or DVD player or Wii
™. Connect the yellow for video
and the red / white for audio. This port shares the audio jacks
with YPbPr.
4. Analog Audio Out – This connection is for connecting to analog
audio receivers.
5. USB – USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
6. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 3 also doubles as the MHL connection for
cell phones. MHL is a protocol where the TV will display what your
cell phone displays. If your cell phone supports MHL you can