Attaching or removing the stand – Sceptre E320BV-FHDD User Manual
Page 10
- 10 -
www.SCEPTRE.com
SCEPTRE E32 LED HDTV User Manual
Attaching or Removing the Stand
1.
To attach the stand, place the display unit flat on a table. Afterwards match the 3
pins on the neck to the 3 pin holes on the stand.
2.
When you have finished aligning the glass base with the neck, screw in the 7
screws provided to tighten the base with the neck.
3.
To remove the stand, remove the 7 screws from the neck. The stand with neck will
come off.
See also other documents in the category Sceptre Televisions:
- E240PC-FHD (53 pages)
- X23WV-KOMODO (111 pages)
- X320BV-HD (51 pages)
- X320BV-HD (55 pages)
- X32BV-NAGA (93 pages)
- X32BV-FULLHD (47 pages)
- X325BV-FHDU (52 pages)
- X370BV-FHD (47 pages)
- X402BV-FHD (56 pages)
- X405BV-FHD3 (51 pages)
- X405BV-FMDU (56 pages)
- X408BV-FHDU (52 pages)
- H409BV-FHD (51 pages)
- X420BV-F120 (52 pages)
- X420BV-FHD (54 pages)
- X425BV-FHD3 (55 pages)
- X460BV-F120 (52 pages)
- X505BV-FHD (53 pages)
- X508BV-FHD (54 pages)
- X505BV-FHDU (54 pages)
- E555BV-FMQR (57 pages)
- X23PV-KOMODO (79 pages)
- X322BV-HD (55 pages)
- X320BV-ECO (49 pages)
- X325BV-FHD (54 pages)
- X328BV-FHD (53 pages)
- X372BV-FHD (55 pages)
- X400BV-FHD (47 pages)
- X405BV-FHD (54 pages)
- X420PV-F120 (52 pages)
- X425BV-FHD (52 pages)
- X460BV-FHD (53 pages)
- X20WG-1080P (38 pages)
- X20WG-NAGA2 (38 pages)
- X22WG-GAMER (42 pages)
- X20WG-Naga (24 pages)
- X22WG-1080P (44 pages)
- X22HG-Naga (44 pages)
- E165BV-HD (58 pages)
- E195BD-SHD+ (58 pages)
- E195BD-SHD+ (45 pages)
- E195BD-SHD+ (56 pages)
- E230BD-FHD (61 pages)
- E245BD-FHDU (57 pages)
- E246BD-FHD (61 pages)