Sceptre E320PV-FHD - Manual (Page 13)

- 13 -
www.SCEPTRE.com
SCEPTRE E320BV-FHD HDTV User Manual
audio. This connection shares audio red / white jacks with YPbPr.
8. Analog Audio Out – This connection is for connecting to analog audio
receivers.
9. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
10. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital coax input.
11. HEADPHONE – This connection is for headphones to be attached to the TV.
Please Note:
• This TV features a power saving function which will turn off the TV
automatically after 10 minutes of idling on a connection with no signal.
This feature is present on all connection.
Installing Batteries to the Remote Control
Please insert the AAA batteries into the remote control. Make sure the (+) side and the (-) side
are installed correctly. When you are installing the battery, the remote’s backside should be
facing up. Afterwards, re-attach the battery cover.
Please note:
• Only use AAA batteries.
• Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
• Dispose the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
• If the remote control is not used for a long time, remove the batteries.
• Keep the remote control away from moisture, sunlight, and high temperatures.