Sceptre E245BD-FHDU - Manual (Page 12)

- 12 -
www.SCEPTRE.com
SCEPTRE E245 Series LED HDTV User Manual
Rear View Connections
1. HEADPHONE – This connection is for headphones to be attached to the TV.
2. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check
http://www.antennaweb.org .
3. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
4. Audio In - This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
5. Video – Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio. This connection shares audio red / white jacks with YPbPr.
6. HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
7. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
8. SPDIF - This connection port is used for sending out digital audio signals to