Sceptre E195BD-SHD+ - Manual (Page 21)

- 21 -
www.SCEPTRE.com
SCEPTRE E195BD-SHD HDTV User Manual
Connecting a Digital Audio Receiver Connecting a Digital Audio Receiver Connecting a Digital Audio Receiver Connecting a Digital Audio Receiver with with with with Coax Coax Coax Coax SPDIF… SPDIF… SPDIF… SPDIF…
1. Make sure the power of HDTV and your receiver is turned off.
2. Obtain a coax SPDIF cable, connect it to your receiver’s coax SPDIF digital
input and the coax SPDIF connection on the LINE OUT port on the back of
the HDTV.
3. Turn on the HDTV and your receiver.
Please Note :
•
If you want pure digital stream for your receiver to decode, you
must also configure the HDTV’s OSD Sound->Digital Audio Out
function. Make sure the option is on 5.1CH.
•
If your receiver is making static noises when receiving 5.1CH, you
must use the PCM option instead.
•
Please reference the receiver’s manual as well, to make sure the
receiver is configured to receive signals correctly from the HDTV.
• The HDTV’s SPDIF out for 5.1CH is ONLY used for
antenna/cable connection. Any other incoming audio signal
will be passed out of SPDIF in PCM format.