Sony XR-C7500RX - Manual (Page 27)

27
Selecting the spectrum
analyzer
The sound signal level is displayed on a
spectrum analyzer. You can select a display
pattern from 1 to 6, or the automatic display
mode.
Mode Display patterns
SA 1
SA 2
SA 3
SA 4
SA 5
SA 6
off Cancel
SA Auto All of these display patterns
appear one by one automatically.
1
Press (SOURCE) to select a source (tape,
tuner, CD, or MD).
2
Press (MENU).
3
Press either side of (PRST/DISC)
repeatedly until “SA” appears.
4
Press (+) side of (SEEK/AMS) repeatedly
to select the desired setting.
Each time you press (+) side of
(SEEK/AMS), the setting changes as follows:
B SA 1 B … SA 6
SA Auto b SA off b
5
Press (ENTER).
Listening to each
programme source in its
registered DSO
— Source Sound Memory (SSM)
Each time you return to the same source, you
can hear the same DSO menu and equalizer
curve registered for that source, even after
changing the programme source or turning the
unit off and then on again.