Santec 2027XL - Manual (Page 3)

INSTALLATION INSTRUCTIONS
- Insert the handle onto the stem. Measure the
gap between the handle and the handle bell.
Remove the handle and cut off the excess
stem.
- Reinsert the handle body onto the stem. Secure it
firmly with the screw.
- Insert the button and tighten it firmly with the cap.
Make sure that the handle turns freely in both directions
without scraping against the handle bell.
TEST FOR PROPER FUNCTION BEFORE CLOSING WALLS!
5. Apply the finish trim.
PAGE 03
Santec Inc.
3501 Challenger Street, Torrance, CA 90503
Tel: (310) 542-0063 Fax (310) 542-5681
www.santecfaucet.com
04/03
2027XL _ _
HOT COLD