Casio EXILIM EX Z 2 - Manual (Page 90)

90
Using the Camera with a Computer
4.
Turn off the camera and
then use the USB cable that
comes with the camera to
connect it to your
computer.
• The camera does not draw
power over the USB cable.
Make sure the camera’s
battery is sufficiently charged
before connecting.
• Make sure that you insert the
cable connector into the
USB/AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result in
poor communication or
malfunction.
• Note that even while the
connector is fully inserted, you still will be able to see
the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
5.
Turn on the camera.
USB port
USB cable
Making sure that the 2 mark on the camera is
aligned with the 8 mark of the USB cable
connector, connect the cable to the camera.
USB/AV port
Large connector
Small connector