Sandia Aerospace STX 165 User Guide - Manual (Page 10)

MIN BRIGHTNESS
The STX 165’s digital display automatically adjusts to ambient light conditions. The
minimum intensity to which the STX 165 will adjust is set by the user. To set the mini-
mum intensity:
1. Rotate the Data knob to select the MIN BRIGHTNESS page.
2. Press the Enter Pushbutton. The brackets will extinguish indicating the Min
Brightness can be adjusted.
3. Rotate the Data knob clockwise to increase the minimum brightness and counter-
clockwise to decrease the minimum brightness.
4. Press the Enter pushbutton to select the new setting.
Default VFR The STX 165 comes preset with 1200 as the VFR squawk code. In some instances a dif-
ferent code is desirable for the VFR squawk. To change the VFR squawk code:
1. Rotate the Data knob to select the DEFAULT VFR page.
2. Press the Enter knob. The brackets will extinguish and the first digit of the
squawk code will be blink, indicating it can be programmed.
3. Rotate the Data knob to select the first digit of the desired squawk code.
4. Rotate the Select knob. The first digit will go solid and the second digit will
blink indicating it can be changed.
5. Continue as above unit all digits are changed to the desired code.
6. Press the Enter Pushbutton. The blinking will stop and the brackets will
return indicating the code has been selected
Note: It is the pilot’s responsibility to insure that the proper squawk code is
selected.
8
3700 Osuna Road NE
Suite 711
Albuquerque, NM 87109
www.sandia.aero