Reliable J420 - Manual (Page 10)

08
MAINTENANCE OF THE BOILER
To maintain your steam ironing system in good condition and to ensure constant
performance, we recommend that you periodically clean the boiler once or twice
a year depending on the hardness of the water:
CLEANING INSTRUCTIONS
ATTENTION: Before cleaning the boiler with the supplied de-scaling powder, please
make sure that the boiler is at room temperature, that it has not been used for at
least 8 hours, and that the boiler is disconnected from the power source.
1. Unscrew and remove the filling cap (1) turn the boiler over and eliminate all
water remaining in the boiler.
2. Dissolve completely the contents of the single package of de-scaling powder
in 2 cups (0.65L) of water.
3. Pour the solution into the boiler.
4. Leave the solution in the boiler for one night with the filling cap off.
5. Completely empty the contents of the boiler and rinse three or four times with
water in order to eliminate possible residues of scale.
6. It is a good idea to spray the first steam onto a cloth and not directly on any
surface since there still may be scale in the system.
ATTENTION: IT IS NOT RECOMMENDED THAT yOU USE ANy OTHER CHEMICAL TO CLEAN
THIS PRODUCT. DOING SO WILL AUTOMATICALLy VOID THE WARRANTy.
TECHNICAL DESCRIPTION
120V Power 1750W
Cold water tank capacity 1.2L
Working pressure 3.5bar
Safety valve Yes
REPLACEMENT & OPTIONS
#J45T – Teflon® ironing shoe
#JTPOWDER Cleaning powder