Ram Trucks 2013 Chassis Cab - Diesel Supplement - Manual (Page 32)

Vehicle Information (Customer Information
Features)
Press and release the UP or DOWN button until “Vehicle
Info” displays in the EVIC and press the SELECT button.
Press the UP and DOWN button to scroll through the
available information displays, then press SELECT to
display anyone of the following choices.
• Battery Voltage
Displays the actual battery voltage.
NOTE:
The battery voltage may show a fluctuation at
various engine temperatures. This cycling operation is
caused by the post-heat cycle of the intake manifold
heater system. The number of cycles and the length of the
cycling operation is controlled by the engine control
module. Post-heat operation can run for several minutes,
and then the electrical system and voltmeter needle will
stabilize.
• Coolant Temp
Displays the actual coolant temperature.
• Oil Pressure
Displays the actual oil pressure.
• Trans Temperature
Displays the actual automatic transmission sump tem-
perature.
• Engine Hours
Displays the total hours of engine operation, and the
hours in drive and at idle.
• Oil Filter Life
Displays the percentage of oil filter life remaining, and
the miles since the last reset.
30 UNDERSTANDING YOUR INSTRUMENT PANEL