Ram Trucks 2011 Chassis Cab - Owner Manual - Manual (Page 74)

Multiple Child Restraint Installation Sequence
(Crew Cab — Rear Seats)
Crew Cab
1. The tether straps loops are located between the rear
glass and the rear seat. There is a tether strap loop located
behind each seating position. You can gain access to the
center seating position tether strap loop by raising the
head restraint and reaching between the rear glass and
rear seat.
2. Place a child restraint on each outboard rear seat and
adjust the tether strap so that it will reach under the head
restraint, through the outboard tether strap loop, then
route it to the tether strap loop located directly behind
the center rear seat.
Head Restraint Adjustment
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE