beautypg.com

Ram Trucks 2011 Chassis Cab - Owner Manual User Manual

Page 437

background image

6. Remove the two headlamp assembly attachment
screws.

7. Reach into the front wheel house ahead of the front
wheel, remove the fastener, and lift the cover over the
access hole in the front of the wheel house splash shield.
Access to the rear of the lamp can be gained through this
access hole.

8. Reach through the access hole of the wheel house
splash shield and lift the slide lock upward far enough to
disengage it from the lock post on the back of the front
lamp unit housing.

9. Remove the headlamp assembly. Grasp the outboard
edge of the lamp and pull it straight forward to disen-
gage the ball stud from the plastic grommet.

7

MAINTAINING YOUR VEHICLE

435