beautypg.com

Units, Compass / temperature display – Ram Trucks 2010 3500 - Owner Manual User Manual

Page 234

background image

to “Tires-General Information/Tire Inflation Pres-
sures” in “Starting And Operating” for additional
information.

• Your system can be set to display pressure units in PSI,

kPa, or BAR.

Units

Press and release the UP or DOWN button until “Units”
displays in the EVIC and press the SELECT button. The
EVIC, odometer, and navigation system (if equipped) can
be changed between English and Metric units of mea-
sure. To make your selection, scroll up or down until the
preferred setting is highlighted, then press and release
the SELECT button until a check-mark appears next to
the setting, showing that setting has been selected.

Compass / Temperature Display

The compass readings indicate the direction the vehicle is
facing. The EVIC will display one of eight compass
readings and the outside temperature.

NOTE:

• The system will display the last known outside tem-

perature when starting the vehicle and may need to be
driven several minutes before the updated tempera-
ture is displayed. Engine temperature can also affect
the displayed temperature, therefore temperature
readings are not updated when the vehicle is not
moving.

• During snowplow usage on vehicles equipped with

outside temperature display, the display may show
higher temperatures than the outside ambient tem-
perature. The higher displayed temperature is due to
blocked or reduced airflow to the underhood ambient

232

UNDERSTANDING YOUR INSTRUMENT PANEL

This manual is related to the following products: