Ram Trucks 2009 1500 - Quick Reference Guide - Manual (Page 10)

speeD control lever
CRUISe on/oFF
•
Push the on/oFF button to activate the Speed Control.
• A Speed Control symbol will appear in the cluster to indicate the
Speed Control is on.
• Push the on/oFF button a second time to turn the system off.
SET
•
With Speed Control on, push down and release the lever to set a
desired speed.
ACCeL/DeCeL
•
Push and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
CANCEL
•
Pull the lever toward you, or apply the brakes to cancel the set
speed and maintain the set speed memory.
• Push the on/oFF button to turn the system off and erase the set
speed memory.
RESUME
•
To resume a previously selected speed in memory, push the lever
up and release.
push
on/off
Button
188153_09b_Dodge_RAM1500_QRG_010909.indd 11 1/9/09 3:13:34 PM