Ram Trucks 2009 1500 - Owner Manual - Manual (Page 212)

To install the bed extender into a divider position per-
form the following:
1. Make sure the center handle is unlocked using the
vehicle key and rotate the center handle vertically to
release the extender side gates.
2. With the side gates open, position the extender so the
outboard ends align with the intended slots in the sides
of the bed.
3. Rotate the side gates closed so that the outboard ends
are secured into the intended slots of the bed.
Center Handle and Lock
1 — Center Handle Lock
2 — Handle
Aligning Gate To Slots
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE