Quick Charge Multi Bank User Manual
Page 6
REPROGRAMMING:
Disconnect the charger from the batteries, and unplug the power
cord. Remove the sheet metal screws holding the cover on.
Select the switch configuration that most closely matches your
application. Whether choosing maintenance mode, or shut off is a
personal preference, however the maintenance mode assures
batteries will remain charged and won’t self discharge.
IMPORTANT: Use switch numbers as a guide, as some boards
may be upside down, and reversed.
NOTE: The #1 position is designated for batteries requiring long
finish rates. If your performance is poor, it could be the batteries
are being undercharged. Verify with specific gravity readings on
wet cells. US Battery, and Full River are two brands that benefit
from longer charge cycles.