Example program – Crestron electronic GreenLight DIN-8SW8 User Manual
Page 21
Crestron DIN-8SW8
DIN Rail High-Voltage Switch
4. If necessary, double click a device to open the “Device Settings”
window and change the Net ID, as shown in the following
illustration.
“Device Settings: Crestron DIN-8SW8” Window
5. The ID code specified in the SIMPL Windows program must
match the Net ID of each unit. Refer to “Identity Code” on page 9.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (F1).
Example Program
An example program for the DIN-8SW8 is available from the Crestron
website (
).
Operations & Installation Guide – DOC. 6666B DIN Rail High-Voltage Switch: DIN-8SW8
• 17