Factory service – PS Engineering MB-10 Pilot’s Guide User Manual
Page 4

MB10 Pilots Guide
Page 4
August 2007
Factory Service
The MB10 is covered by a one-
year limited warranty. See warranty
information.
Call PS Engineering, Inc. at
(865) 988-9800 before you return
the unit. This will allow the service
technician to provide any other sug-
gestions for identifying the problem
and recommend possible solutions.
After discussing the problem
with the technician and you obtain a
Return Authorization Number,
ship product to:
PS Engineering, Inc.
Attn: Service Department
9800 Martel Road
Lenoir City, TN 37772
(865) 988-9800 FAX (865)
988-6619.
www.ps-engineering.com/
support.shtml
NOTE:
PS Engineering is not responsible
for units shipped US Mail.
If no method of payment is pro-
vided, the units will be returned COD. If
no RMA or description of problem is
present, the shipment will be refused.
thorized by the dealer.
This warranty is not transfer-
able. Any implied warranties expire
at the expiration date of this war-
ranty. PS Engineering SHALL NOT
BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAM-
AGES. This warranty does not cover
a defect that has resulted from im-
proper or unreasonable use or main-
tenance as determined by us. This
warranty is void if there is any at-
tempt to dissemble this product
without factory authorization. This
warranty gives you specific legal
rights, and you may also have other
rights which may vary from state to
state. Some states do not allow the
exclusion of limitation of incidental
or consequential damages, so the
above limitation or exclusions may
not apply to you.
PS Engineering, Inc. 2007©
Copyright Notice
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed writ-
ten permission of PS Engineering, Inc. is strictly prohibited. For further information contact the Publica-
tions Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800