Factory service – PS Engineering PMA8000B X User Manual
Page 16

Page 16
202-890-0202
PMA8000B Pilot Guide Rev. 6
PS Engineering, Inc. 2005 ©
Copyright Notice
Copyrighted information in this manual is subject to change without notice. PS Engineering reserves the right to improve or change the products or 
contents of this manual, without notification of any person or agency. The contents of this pilot’s guide may be downloaded, stored and reprinted 
for personal use provided that this copyright information is included. Commercial use is strictly prohibited. For further information contact the 
Publications Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800 
this case, the purchaser assumes the risk of loss.
This warranty is not transferable. Any implied warranties expire at the expi-
ration date of this warranty. PS Engineering SHALL NOT BE LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty does 
not cover a defect that has resulted from improper handling, storage or pres-
ervation, or unreasonable use or maintenance as determined by us. This war-
ranty is void if there is any attempt to dissemble this product without factory 
authorization. This warranty gives you specific legal rights, and you may 
also have other rights, which may vary from state to state. Some states do not 
allow the exclusion of limitation of incidental or consequential damages, so 
the above limitation or exclusions may not apply to you. 
All items repaired or replaced under this warranty are warranted for the re-
mainder of the original warranty period. PS Engineering, Inc. reserves the 
rights to make modifications or improvements to the product without obliga-
tion to perform like modifications or improvements to previously manufac-
tured products. 
Factory Service
The units are covered by a three-year limited warranty. See warranty infor-
mation. Call PS Engineering, Inc. at (865) 988-9800 before you return any 
unit. This will allow the service technician to provide any other suggestions 
for identifying the problem and recommend possible solutions. 
After discussing the problem with the technician and you obtain a Return 
Authorization Number, ship product to: 
PS Engineering, Inc. 
Attn: Service Department 
9800 Martel Rd. 
Lenoir City, TN 37772 
(865) 988-9800 FAX (865) 988-6619 
Email: [email protected] 
Units that arrive without an RMA number, or telephone number for a 
responsible contact, will be returned un-repaired. PS Engineering is not 
responsible for items sent via US Mail. 
