Pro Boat PRB3750S - Manual (Page 4)

4 4
Assembled Formula FASTech 26 Brushless EP RTR •
Pro Boat 2 .4GHz pistol-grip radio transmitter •
Boat stand •
Attach the side stand pieces by interlocking them into the end pieces
as shown . Secure the interlocking pieces with medium CA or epoxy .
Make certain you allow the adhesive to fully cure before placing your
boat on the stand .
Install 4 AA alkaline batteries into the transmitter, following the
instructions provided for your radio system .
You will need to purchase the following to get your boat on the water:
4 AA alkaline batteries for the radio transmitter •
7 .2V Ni-MH Battery Pack with Deans Connector (PRB3316) x2 •
Twin Peak Dual Battery Charger (DYN4033) •
Tamiya/Deans adapter (PRB3312) •
PRB3316
5100mAh
Contents
Section 2: Installing the Transmitter Batteries
Section 1: Assembling the Boat Stand
Additional Required Items