Pro Boat PRB3050 - Manual (Page 2)

2
Thank you for purchasing the Pro Boat ® Volere ™ 22
Electric-Powered Ready-To-Run boat. Please read
these instructions carefully before attempting to
operate the boat.
The Volere comes ready-to-run with an AM radio
system and electronic speed controller already
installed. All assembly is done at the factory,
allowing you to quickly get the boat running.
You will need to purchase the following items to get the boat on the water:
• 8 AA alkaline batteries for the radio transmitter
• Ni-MH Battery Fast Charger (DYN4063)
• No assembly required
• Real wood trim layered on a hand-crafted fiberglass hull
• Pro Boat
® AM 27MHz radio system
• Preinstalled electronic speed control with reverse
• Includes a 8.4V 1600mAh battery for longer run times
 1. Carefully remove the boat and radio
transmitter from the box.
 2. Inspect the boat. If you notice damage from
shipping, please contact the hobby shop
where you purchased it.
The items included with your Volere 22 are:
• Assembled Volere 22 EP RTR
• Pro Boat radio transmitter
• Boat stand
• 8.4V, 1600mAh Ni-MH battery pack
Introduction
Additional Required Items
Inspection
Features