Pro Boat PRB2500 - Manual (Page 5)

Re-install the tuned pipe mount.
Remove the transmitter from the box.
Remove the battery cover on the bottom of the transmitter.
Note the proper polarity and insert 8 “AA” batteries into
the transmitter.
Turn on the radio to ensure the batteries have been
installed correctly.
Turn the radio off.
Transmitter Batteries
5
Section 1: Installation of Receiver and Transmitter Batteries (cont.)
Re-install the battery holder back into the radio box and
properly seal the radio box with clear tape. Failure to
properly seal the radio box could result in damage to your
radio equipment.
Re-attach the tuned pipe and coupler to the exhaust manifold.
6A
6B
7
8A 8B
9A 9B
9C