beautypg.com

Checking the radio system, Binding – Pro Boat PRB0400 User Manual

Page 7

background image

7

EN

A

Checking the Radio System

CAUTION: Always keep all body parts, hair

and dangling or loose items away from a spinning

propeller, as these could become entangled.

NOTICE: Always power on the transmitter before

powering on the ESC. Always power off the ESC

before powering off the transmitter. Never transport

the boat with the battery connected to the ESC.

1. Turn the transmitter throttle and steering trim knobs

to the 10 o’clock position.

2. Power on the transmitter.
3. Connect a fully charged battery to the ESC.
4. Power on the ESC. The boat will beep 5 times.
5. Ensure the rudder moves in the proper direction

when the steering wheel is moved left or right.

6. Pull the throttle to full, then return the throttle to

neutral, ensuring the propeller turns counterclockwise.

The auto-sensing voltage cutoff will also engage when

the ESC detects a low battery charge. Release the

throttle and recharge the battery.

Binding

Failsafe

In the unlikely event that the radio connection is lost

during use (possibly due to low transmitter batteries

or distance between the receiver and transmitter), the

receiver will hold the rudder at the last command with

no throttle.
If the receiver is powered on before powering on the

transmitter, the receiver will enter this failsafe mode.

When the transmitter is powered on, normal control is

resumed.
Binding is the process of programming the receiver to

recognize the GUID (Globally Unique Identifier) code of a

single specific transmitter. The included transmitter and

receiver are bound at the factory. If you need to rebind,

follow the instructions below.

1. Power off the

transmitter and

ESC.

2. Connect a fully

charged battery

pack to the ESC.

3. Power on the ESC.

The RED LED on

the ESC flashes.

4. Press the bind

button (A) on the

receiver. The RED

LED on the ESC flashes rapidly.

5. Power on the transmitter.
6. The RED LED on the ESC turns solid when the radio

system is bound.

You must rebind when binding the receiver to a different

transmitter.

NOTICE: Do not attempt to bind the transmitter and

receiver if there are other compatible transmitters in

bind mode within 400 feet. Doing so may result in

unexpected binding.

Impulse 17 • Miss GEICO 17

right

left

brake/reverse

throttle

This manual is related to the following products: