PRG V276 Installation & Operation Manual - Manual (Page 23)

V276 ON MAC INSTALLATION & OPERATION MANUAL 13
SETTING PREFERENCES
Brightness Level
The brightness level can be set for the console backlight and desk lamps. This is done by pressing the blank button
(i.e., the button with no label) at the Encoder area and turning the Pan or Tilt encoders.
To set a new brightness level:
Step 1. At Encoder area, press and hold blank button to activate dimming (Figure 12). Options are:
a. Pan encoder controls backlight of entire console.
b. Tilt encoder controls desk lamps.
Step 2. While holding down button, turn appropriate encoder until desired brightness level is reached.
Step 3. Release button. New brightness level will be set.
Figure 12: Front Panel Brightness Control
Intensity Encoders
Tilt Pan
Action
Master
Grand
Out Full Zero Mark Next Last
High
Light
Fan Color Beam Image Frame
Slow Dynam Effect 3D
Cmd
Option
Shift Invert Clear
All Active
Arm Home
Live/
Preview
Manual
Time
Auto
Display
Snap
Shot
Chan
Select
Plan
View
Cue
Sheet
Filter Time Patch Palette Status Subs
11 13 12
1 2 3
Back
Go
Back
Go
Back
Go
Rate Clear Load
Blank Button