Cadco OV-250 - Manual (Page 3)

I. INSTRUCTIONS FOR
THE INSTALLER
Dear customer, we thank you and compli-
ment you for having purchased one of our
products.
The warnings and suggestions that follow
concern the phases for proper installation,
use and maintenance for your safety and for
the best use of the appliance.
1. DATA PLATE
The data plate is positioned on the right side
panel.
The technical characteristics are identified in
the enclosed page “technical data”.
2. CERTIFICATIONS
CSA C-US BRAND
SERIE XA
Certificate of Compliance
N.202281-1008284
Applicable Requirements:
CAN/CSA-C22.2 No. 100-1995 - Motors and
Generators.
CSA Std C22.2 No. 109-M1981 – Commercial
Cooking Appliances.
UL Std No. 197 - Commercial Electric Cooking
Appliances.
UL Std No. 1004 - Electric Motors
“ The “C” and “US” indicator adjacent to the
CSA Mark signifies that the product has been
evaluated to the applicable ANSI/UL and
CSA Standards, for use in the U.S. and
Canada. This includes products eligible to
bear the NRTL indicator. NRTL, i.e. Nationally
Recognized Testing Laboratory, is a designa-
tion granted by the U.S. Occupational Safety
and Health Administration (OSHA) to labora-
tories which have been recognized to per-
form certification to U.S. Standards.
NSF BRAND
SERIE XA
Certificate N. 79610/79610B
N. 79610/79611/B
NSF International recognizes UNOX SPA
products as complying with ANSI/NSF 04.
Standard 004 - Commercial Cooking,
Rethermalization and Powered Hot Food.
3. INSTALLATION – Preliminary Operations
All the electrical connections and installations
must be done by qualified personnel in com-
pliance with all local codes.
3.1 FEET ASSEMBLY (If applicable)
The Cadco-Unox models OV-250 and OV-
350 are shipped with feet installed. Some
other model ovens are shipped without the
feet being installed, and must be assembled.
If your convection oven has feet, do not install
or use the oven without them. The feet are
shipped in the cooking cavity and must be
assembled.
Screw the support feet into the bottom of the
oven as shown in the illustration. After
assembling the feet, the oven’s height may
be adjusted by screwing or unscrewing the
feet to level the unit.
The models OV-500 and OV-600 require
washers when the feet are assembled.
ENGLISH
3
ENGLISH
NOTE - DO NOT USE YOUR OVEN
WITHOUT INST
ALLING THE FEET
.