Philips TS3654C User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A Tow that you have looked up

the two-digit Remote Code

Number for your brand of VCR

(on previous page), you are
ready to follow the four simple
steps below.

Please read through steps 1-4

before beginning.

rrwm

Press and release the REC

(RECORD) button.

Within thirty seconds after

releasing the REC button, press
and release the VCR System
button.

Within thirty seconds after

releasing the VCR System but
ton, ENTER THE TWO
DIGIT CODE NUMBER for
the desired VCR. The remote is
now ready to send commands to
the VCR.

Point the remote at the VCR.

Press the POWER button on the
remote to turn the VCR ON.

<$>

Try it out. The Channel

£ and VCR buttons on the

remote should now operate the
VCR.

Remember, if this doesn't work
the first time, repeat steps using
the same remote code number.

If after a second try the remote
does not operate your VCR, and
there are more code numbers list

ed for your brand VCR, use the
next listed code number.

If after repeated attempts the code
number method does not work
your VCR, try the "VCR
SEARCH" method on page 28.