Philips TS3654C - Manual (Page 20)

□ How TO U
se the
A
udio
A^
ideo
I
nput
J
acks
(C
ontinued
)
y ou can view the playback of
VCR tapes (Video Disc
Players, camcorders, etc), by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play­
back of a VCR tape:
( becin )
Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
Press the MENU (M) button
on the remote, then press the
MENU A or T buttons to select
the word INPUT with the TV’s
on-screen arrow.
Note: You can press the CHAN­
NEL AT buttons to select
“VCR/AUX” (if it has been
added to the TV’s channel mem­
ory.) See page 7 for details.
Press the (-t) button to select
the VCR/AUX(iliary) INPUTS
on the rear of the TV.
Tfirn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
\ ' / S maim H ki !•
Remember, when you're
* through using the A/V
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con­
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin­
gle audio OUTPUT) VCR, "Y"
Coimectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to con­
nect to the audio inputs on the TV.
PICTURE AND SOUND FROM PLAY­
BACK OF VCR TAPE
BACK OP IV
siBsao
SUP
SOLlfitJiMAGE
SPEAKER
DINPUT
CASU
J RCA PHONO PLUG
CABLES {NOT SUP-
PLIED)
-------------
AUDIO IN
(RED/WHITE)
BACK OF VCR
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: THE "TV/VCR" BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN THE VCR/AUX MODE
(AS WELL AS SELECT CHANNELS
3 OR 4.)
20