Setting the timer, Activating and deactivating timer, Activating and deactivating sleep – Philips MC-120-37 User Manual
Page 19: Clock/timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clock/Timer
1
2
3
4
5
1
2
3
In
Standby,
press
CLOCK.
The clock digits for the hours flash.
Turn
VOLUME
to set the hours: clockwise for
hours up; counter-clockwise for hours down.
Press
CLOCK
again.
The clock digits for the minutes flash.
Turn
VOLUME
to set the minutes: clockwise for
minutes up: counter-clockwise for minutes down.
Press
CLOCK
to confirm the time.
Setting the timer
The system can be used as an alarm clock,
whereby the CD orTUNER is switched on at a
set time.The clock time needs to be set first
before the timer can be used.
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
In any mode, press
TIMER ON»OFF
for more
than 2 seconds.
Turn
VOLUME
clockwise (or press
SELECT
SOURCE)
to select sound source.
Press
TIMER ON'OFF
to confirm your
desired mode.
The selected source
or nfTi^ _
is shown. The clock digits for the hours flash.
Turn
VOLUME
to set the hours: clockwise for
hours up; counter-clockwise for hours down.
Press
TIMER ON*OFF
again.
The clock digits for the rninutes flash.
Turn
VOLUME
to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
Press
TIMER ON»OFF
to confirm the time.
The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER ON*OFF
once.
Display shows
timer
if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.The clock time
needs to be set first before the sleep timer can
be used.
o o
Press
SLEEP
on the remote
control once or more.
^ Display shows SLEEP and
one of the sleep time options
in sequence: ED, PE, 3D, 15,
SLEEP Orr.Eu... if you have
selected a time. Once SLEEP is activated, SLEEP
OrJ scrolls across the display at repeated
intervals.
To deactivate, press
SLEEP
on the remote
control once or more until SLEEP DEE is
shown, or press
STANDBY ON
on the system
or remote control.
SLEEP DEE scrolls across the display
19