Philips MC-120-37 - Manual (Page 14)

CD Operation
fCf>CAT tMUm.E
IMPORTANT:
The lens of the CD player should never be
touched.
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
• CD-ROM. CD-I. CDV. VCD. DVD or computer
CDs, however are not possible.
1 Select CD source.
2 Press OPEN-CLOSE on the
top
of the system to open the CD
compartment.
OPEN is displayed when
you
open the CD compartment.
Insert a disc with the printed side facing up and
press down on OPEN*CLOSE to close the
CD door
REPS is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
Press PLAY*PAUSE Hi (on the remote
control ►!!) to start playback.
Current track number and elapsed playing
time of the track are displayed during disc
playback.
To interrupt playback press PLAY»PAUSE Hi
(on the remote control ►!!). Press
PLAY«PAUSE HI (on the remote control Hi)
again to resume play.
The display freezes and the elapsed playing
time flashes when playback is interrupted.
To stop disc playback, press STOP ■.
Note: CD play will also stop when;
- the CD door is opened,
- the disc has reached the end,
- you select another source: TAPE,TUNER or AUX,
- you select to standby,
- you press the tape deck PLAY ► key.
Selecting a different track
Press PREV or NEXT PN (on the remote
control W or W) once or repeatedly until the
desired track number appears in the display.
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press PLAY*PAUSE Hi (on the
remote control ►!!) to start playback.
Finding a passage within a track
Press and hold down on PREV or NEXT
►W (on the remote control « or^^ ).
The disc is played at high speed and low
volume.
When you recognize the passage you want,
release PREV or NEXT ►N (on the
remote control ^ or ►> ).
Normal playback continues.
Note:
- During a disc program or if SHUFFLE/ REPEAT
active, searching is only possible within the same
track.
14