Cable tv, Ooking, Ntenna – Philips PR1908C User Manual
Page 3: Able, Onnections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H
ooking
U
p
Y
our
TV
(A
ntenna
/C
able
C
onnections
) (C
ont
’
d
)
VCR
TO
TV
B
asic
C
onnection
J
'he basic Antenna /
Cable to VCR to TV
connection is shown here.
For more information on
other hookups (with Cable
Converter Boxes or
Descrambler Boxes), refer
to your VCR or Cable
Converter Box Owner's
Manual.
(BEGINI-----------------------------------------
Connect your
Antenna or Cable signal to
the IN FROM ANT(enna)
plug on the VCR.
,
Connect the OUT TO TV
plug on the VCR to the
ANT(enna) IN(put) plug on
the TV (connecting cable sup
plied with the VCR).
Refer to the Owner's
Manual included with your
VCR for other possible con
nections and TVA/CR operat
ing details.
Outdoor VHF/UHF
Antenna
300 to 750 Adaptor
Back of TV
C
able
TV
I
----- IBEGINI-
C
able
I
nput
/C
onverter
~\7our Cable TV signal
T into your home may be
a single (75il) cable or a
Cable Converter Box
installation. In either case,
the connection to the TV is
very easy.
If your Cable TV sig
nal is a single round cable (75
Q) then you're ready to connect
to the TV.
If you have a Cable
Converter Box:
Connect the Cable TV signal to
the Cable Signal IN(put) plug
on the Cable Converter Box.
Connect the Cable TV
cable to the ANT(enna) IN(put)
plug on the TV.
If you have a Cable Converter
Box:
Connect the OUT(put) plug of
the Cable Converter Box to the
ANT(enna) IN(put) plug on the
TV.
NOTE: The connecting cable for
the Cable Converter Box is supplied
by the Cable TV company.
Note to the Cable TV System Installer: This reminder is provided to call the
Cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding ~ in particular, specifying
that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as possible.
Back of TV
Cable TV Signal
S
mart
\ i /
Remember, __
set the TV for the
type signal you've
just connected (see
page 4).
To select only the
channels on your
Cable system, see
“Channel Auto
Memo" (page 4). If
you use a Cable
Converter Box, set
the TV to the same
channel as the con
verter's CH 3/4
switch (on the rear
of the Cable
Converter Box).
Round Cable 750
(Supplied by
Cable TV
Company)
- 3 -